sE Electronics sE2300 Large-diaphragm Condenser Microphone

HANDCRAFTED 1″ TRUE CONDENSER CAPSULE

Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai – and unlike other microphones with backplate or electret designs, the sE2300 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect.

THREE SELECTABLE POLAR PATTERNS

The 3-position Pattern Switch is located on the rear side of the microphone, and allows the sE2300’s polar pattern to be changed from omnidirectional to cardioid to figure-eight. This allows for great control over the balance between direct and ambient sound.

TRADITIONAL CLASS-A ELECTRONIC DESIGN

Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2300’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances.

TWO SWITCHABLE ATTENUATION LEVELS & LOW-CUT FILTERS

The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments…think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.

Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques.

CUSTOM-BUILT OUTPUT TRANSFORMER

Reviving the spirit of classic studio microphones, the sE2300’s custom transformer provides superb depth & weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation.

ALL-METAL HOUSING & PREMIUM FINISH

Unlike the cheaply constructed bodies of some other affordable microphones, the sE2300’s all-metal chassis provides efficient rejection of any electrical interference and noise – and the high-quality finish ensures a great look for years to come.

GOLD-PLATED XLR CONNECTOR

Ensures loss-free, reliable signal connection for years and years and years and…

Capsule Type: Hand-crafted 1″ True Condenser

Polar Pattern: Cardioid, Omni-directional, Figure-8

Frequency range: 20 Hz – 20 kHz

Sensitivity: 24 mV/Pa (-32.5 dBV)

Max SPL: 126 / 136 / 146 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)

Equivalent noise level: 9 dB(A)

Dynamic range: 117 / 127 / 137 dB (0/10/20 dB Attentuation pad)

Signal to Noise Ratio: 85 dB

Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable

Attenuation Pad: 10 / 20 dB, switchable

Powering: 48 Volts according to IEC 61938

Electrical Impedance: 40 Ohms

Recommended load impedance: >1k Ohms

Current consumption: 4.8 mA

Connectivity: 3-pin male XLR connector

Dimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)

Weight: 611 g (21.55 oz.)